How to Reset Smart TV (With 7 Steps)

How to reset a smart TV that is stuck on the logo without using the remote. You’ll learn when and how to reset your television in this article. When we are unable to execute a normal factory data reset or when the software crashes, hangs up or gets stuck on the boot screen, we must perform a forced Factory data reset (Hard reset or Entering into Recovery Mode). However, take in mind that the Forced Factory Data Reset would wipe off all of your customized settings, including parental lock and the following.

How to Reset Smart LED TV

• Network settings – Wireless Key
• Gmail Account
• Google Account
• Play store Account
• Application data and System data as well
• User data, Channel data, all settings

How to Reset China Smart LED TV

Here are some distinct How to reset processes that may be used for various Chinese Smart TVs, however, keep in mind that the following methods will only work on TVs that include the recovery option in the firmware.

Step 1.

• To turn on the switch, press and hold the Power/standby and VOL- keys on the TV.
• Keep pressing for around 30 seconds, and the green light will flicker for a few seconds.
• The LED television automatically reboots.
• All user data and cache will be cleared when the LED TV enters Recovery Mode.
• The LED TV restarts and displays the basic configuration screen.
• Done. You may now make channel settings and scan data.

Step 2.

• To turn on the switch, press and hold the Power/Standby and VOL+ keys on the TV.
• Keep pressing for around 30 seconds, and the green light will flicker for a few seconds.
• The LED television automatically reboots.
• All user data and cache will be cleared when the LED TV enters Recovery Mode.
• The LED TV restarts and displays the basic configuration screen.
• Done. You may now make channel settings and scan data.

Step 3.

• Then turn on the switch by pressing and holding the VOL- and VOL+ keys on the TV.
• Continue pressing for around 30 seconds, and the greenlight will flicker for a few seconds.
• The LED television automatically reboots.
• All user data and cache will be cleared when the LED TV enters Recovery Mode.
• The LED TV restarts and displays the basic configuration screen.
• Done. You may now make channel settings and scan data.

Step 4.

• Keep pressing for around 30 seconds, and the green light will flicker for a few seconds.
• Then turn on the switch by pressing and holding the CH- and CH+ keys on the TV.
• The LED television automatically reboots.
• Done. You may now make channel settings and scan data.
• The LED TV restarts and displays the basic configuration screen.
• All user data and cache will be cleared when the LED TV enters Recovery Mode.

Step 5.

• Press and hold the Home and Menu key from Remote then Power on the switch.
• LED TV reboots itself.
• LED TV reboots itself and shows the initial setup screen.
• LED TV will be in Recovery Mode and will clear all user data and cache.
• Done. Now you can make setting and scan channel data.
• Now TV will be on in recovery Mode. Select the option you want to wipe out data.

Step 6.

• Press and hold the Confirm (OK) and Restore key from Remote then Power on the switch.
• Now TV will be on in recovery Mode. Select the option you want to wipe out data.
• LED TV reboots itself.
• LED TV will be in Recovery Mode and will clear all user data and cache.
• Done. Now you can make settings and scan channel data.
• LED TV reboots itself and shows the initial setup screen.

Step 7.

• Power on the switch and release standby by the power button on the keypad.
• Note if Remote Control does not work then use External keyboard/Mouse.
• After the Standby release, immediately press and hold Vol+ or VOL- key until the display recovery screen.
• Now select the option Wipe Data/Factory Reset.
• Done. Now you can make settings and scan channel data.
• LED TV reboots itself and shows the initial setup screen.

How to Reset to Hit – Trial

If you are not a technician or an electronic expert with insufficient knowledge of how to reset or repair LED TVs, I recommend that you do not open the TV if it does not recover using the 7-step methods and that you do not attempt to load any USB boot firmware without first knowing the mainboard specifications.

It may cause damage to your television, and the Repair Geeks team will not be held liable in the event of any damage or loss. For such users, I recommend contacting your local expert technicians or service center support to have it repaired.

If the offered approaches fail to recover TV, you should be aware of further recovery options. Secure CRT is also useful for smart TV recovery, but you must know how to reset using the secure crt command.

If your TV’s keypad isn’t working and you want to try the hit-or-miss method, open the TV and detach the mainboard, then short the keys to Ground Key one by one with a tweezer or jumper wire.

I’m hoping that this hit-or-miss approach may enable technicians or users to retrieve the TV. However, keep in mind that the screen must remain visible while we do recovery processes and the board reboots to recovery mode options, where we must clear the cache memory and reset to factory default in order to restore the TV to its original state.

Finally, if the TV does not recover or enter recovery mode, utilize the USB boot technique with the required firmware file if the TV does not recover or enter recovery mode. However, we frequently do not have the matching firmware for the LED TV Brand to recover it, so we load the board matching firmware in it, resulting in a change in the LED TV’s logo and remote control. If you’re new to this and don’t know how to load or install software/firmware files, you should start here.

Popular Posts:

• New COF IC Datasheet Download
• LCD LED – Plasma TV Blinking Codes