How to Load Firmware/Software

How to Load Firmware, Firmware is a piece of software, a program, or a set of instructions written in a machine language that allows hardware to run or be controlled. The LCD/LED TV Software/Firmware will be discussed in this topic. How to Install Firmware and Load Firmware, as well as why we need it. The following are typical scenarios in which we will need to install the software. You will be able to easily flash the firmware after reading this guide. So, if you want to learn How to Load Firmware, you should read this article.

Firmware Installation Guide

• Installation of a new board according to your specifications.
• When the resolution or remote control needs to be changed.
• If the software isn’t working properly.
• When software becomes corrupted or stops working
• the red light board illuminates. Only Universal TVs are allowed.
• In the case of Android/Smart TV, the logo is stuck.

What are the requirements for installing the flash application or software?.

• FAT32 formatted USB disc or pen drive.
• Software, firmware, programs, flash files,
• bin files, and other files are required.
• Before installing a new program or software,
• always save a backup of your existing flash.

When loading/installing the firmware, bear this in mind.

• Check the software’s size to see if it’s a dump file or a USB boot application.
• The size of the dump file is always the same as that of a flash ic. A 4MB flash ic, for example, has a 4MB dump file (4096KB).
• If the software is a USB upgrade, it will be less than 4MB in size.
• When the TV is turned on, a programmer or USB upgrade technique can be used to load the dump or backup file.

• If a USB2 slot is available, utilize it for firmware installation.
• Always use a FAT32 pen drive that is branded and empty.
• Smart/Android firmware is above 100 megabytes, but non-smart software is 1 megabyte, 2 megabytes, 4 megabytes, 8 megabytes, 16 megabytes, and so on.
• Always transfer bin files including certain text files to a pen drive without using a folder or ZIP file.
• Before loading firmware, always check the ROM/RAM capacity.
• Before loading firmware, double-check the Remote Control and Logo information.
• During software installation, do not turn it off.

Firmware, Bin Name

• The software is created by the board maker and is given a unique name for each board. The following are some examples.
• For firmware on non-smart boards, do not rename the original bin name.
• You can rename the Reference number, such as REF48, to SOS for universal boot in smart/android firmware.
• You can rename or write whatever you like in the backup dump file name, but it’s best to write it as a board name or TV brand name/model.

Firmware, Bin Extension

The file extension is the name of the file type that appears at the conclusion of the document. In firmware files, you’ll mostly see the following extensions. .bin,.img, and.pkg are examples of file extensions. It’s possible that the file extension name is different. It is dependent on the developer and how the file is packed.

Process For Installation in Non-Smart Board

• Copy the appropriate bin file to a FAT32 USB device that has been formatted.
• Connect the IR/Keypad to the PCB.
• While the TV Board is turned off, connect the USB drive to it.
• Now turn the switch on. Automatically, the LED light indicator begins to flash (color does not matter).
• Wait for the led light to stop flashing. The speed of the led flashing increased in some circumstances when the task was done.
• Remove the USB disc and turn off the standby mode.
• In non-smart or universal TV boards, there is no screen display throughout the software installation procedure.

Process For Installation in Smart Android Board

• Copy the appropriate bin file to a FAT32 USB device that has been formatted.
• Connect the IR/Keypad to the Board.
• While the board is powered off,
• connect the USB drive to the USB-2 Slot on the TV Board.
• Now read the next paragraphs.

Bin LED/TV Name with Board Model

T.VST59.031	bin_v59.bin
T.R85.031	YDG.8501.bin
CV338H-A42	CtvUpgrade.bin
CV960XH-A50	aml_upgrade_package.img
TP.AND_TERM.PB818	allupgrade_and_term_MAX57.pkg
T.R83.031	YDG.8503.bin
TP.MT5510S.PB782	allupgrade_5510_8G_1G_ref75
T.HV553.81	allupgrade_v553_8G_1G.bin
T.VST29.031	MSTFLASH.bin
HK.T.RT2841P631	install.img
VS.SP35851	MSD6A358AXG VS_S358XX.bin
T.MT5510S.82	allupgrade_5522_8G_1G.pkg
T.HV510.81	allupgrade_v510_1G_100.bin
TP.VST59S.PB781	bin_v59s.bin
4704-m608t9-a5233k01	MstarUpgrade.bin
TP.MS338.PB801	allupgrade_msd338
TP.MS628.PC821	allupgrade628_45
P65-358TV6.0	MST358O.bin
P50-338TV5.0	messi.bin
VS.SP35851	MSD6A358ATG VS_S358AT.bin
P50-368V5.0	MTK368P.bin

Step, 1 How to Load Firmware

• Turn on the television and wait for Auto Boot to begin.
• The status of the installation will be displayed on the screen.
• After finishing, turn off the TV and turn it back on.

Step, 2 How to Load Firmware

• Switch ON by pressing the power/standby button.
• Hold the key down until the installation progress is displayed on the screen.
• After finishing, turn off the TV and turn it back on.

Step, 3 How to Load Firmware

• Switch on by pressing the VOL+ VOL- Key.
• Hold the key down until the installation progress is displayed on the screen.
• After finishing, turn off the TV and turn it back on.

Step, 4 How to Load Firmware

• Turn on the television, then press the Power/standby
• key to turn off the standby mode. Press and hold
• the VOL+ and VOL- keys at the same time.
• The key will be released after the USB has booted.
• After finishing, turn off the LCD TV and turn it back on.

Disclaimer

• The software can be installed without the use of a monitor or panel.
• After completing the installation, certain boards do not need to be turned off.
• Some boards only require a standby release once the program has been completed.
• Some boards don’t have a progress bar that shows how far the installation is progressing. In this instance, simply follow the flashing Led light.

If you’re new to this and don’t know how to load or install software/firmware or dump files, go to your local service centre first. In the event of any damage or loss, the Repair-Geeks team is not liable.

Visit more Posts:

• All LCD/LED Service Menu Code
• How to Reset Smart TV (With 7 Steps)